@article{Boi_C-2022_89175, title = {One year of surgical mask testing at the University of Bologna labs: Lessons learned from data analysis}, author = {Boi, C. and Borsetti, F. and Brugo, T. and Cappelletti, M. and De Angelis, M. and Fedi, S. and Di Giacomo, S. and Fabiani, T. and Foli, G. and Garelli, A. and Genchi, U. and Ghezzi, D. and Gualandi, C. and Lalli, E. and Magnani, M. and Maurizzi, A. and Mazzi, F. and Mehrabi, N. and Minelli, M. and Montalbano, R. and Morelli, L. and Nici, S. and Onesti, R. and Paglianti, A. and Papchenko, K. and Pappalardo, S. and Parisi, N. and Rapino, S. and Reggio, M. and Roselli, M. and Ruggeri, E. and Sabatini, L. and Saracino, E. and Scarponi, G. and Serra, L. and Signorini, V. and Storione, A. and Torsello, M. and Tugnoli, E. and Vargiu, C. and Vidali, G. and Violante, F.}, month = {aug}, year = {2022}, abstract = {The outbreak of SARS-CoV-2 pandemic highlighted the worldwide lack of surgical masks and personal protective equipment, which represent the main defense available against respiratory diseases as COVID-19. At the time, masks shortage was dramatic in Italy, the first European country seriously hit by the pandemic: aiming to address the emergency and to support the Italian industrial reconversion to the production of surgical masks, a multidisciplinary team of the University of Bologna organized a laboratory to test surgical masks according to European regulations. The group, driven by the expertise of chemical engineers, microbiologists, and occupational physicians, set-up the test lines to perform all the functional tests required. The laboratory started its activity on late March 2020, and as of the end of December of the same year 435 surgical mask prototypes were tested, with only 42 masks compliant to the European standard. From the analysis of the materials used, as well as of the production methods, it was found that a compliant surgical mask is most likely composed of three layers, a central meltblown filtration layer and two external spunbond comfort layers. An increase in the material thickness (grammage), or in the number of layers, does not improve the filtration efficiency, but leads to poor breathability, indicating that filtration depends not only on pure size exclusion, but other mechanisms are taking place (driven by electrostatic charge). The study critically reviewed the European standard procedures, identifying the weak aspects; among the others, the control of aerosol droplet size during the bacterial filtration test results to be crucial, since it can change the classification of a mask when its performance lies near to the limiting values of 95 or 98%.}, volume = {294}, journal = {Separation and Purification Technology}, publisher = {Elsevier}, url = {https://doi.org/10.1016/j.seppur.2022.121180}, }